Chevrolet Spark GAS Owner Manual (GMNA-Localizing-U.S./Canada-
9234780) - 2016 - CRC - 10/15/15
Vehicle Care
231
License Plate Lamp
1. Attachment Screws
2. License Plate Bulb
3. Bulb Socket
To replace a license plate
lamp bulb:
1. Remove the two screws (1)
from the license plate lamp
assembly.
2. Turn and pull the license plate
lamp assembly down.
3. Turn the bulb socket (3)
counterclockwise and pull it out
of the lamp assembly.
4. Pull the bulb (2) straight out of
the socket.
5. Push the new bulb into the
socket.
6. Install the bulb socket (3) by
turning clockwise into the
license plate lamp assembly.
7. Replace the license plate lamp
assembly by using the two
screws to secure.
Replacement Bulbs
Exterior Lamp
Bulb
Number
Back-Up Lamps
W16W
Front Turn Signal/
Parking Lamps
7444NA
High/Low-Beam
Headlamp
H13
License
Plate Lamp
W5W LL
Rear Turn Signal/
Taillamps
WY21W
Stoplamp/
Taillamps
W21W LL
For replacement bulbs not listed
here, contact your dealer.