Chevrolet Malibu Limited 2016 Service Manual Download Page 205

Page: 205 / 360

Chevrolet Malibu Limited Owner Manual (GMNA-Localizing-U.S/Canada-

9086425) - 2016 - crc - 5/12/15

204

Driving and Operating

2. Turn the engine off and wait

15 seconds.

3. Start the engine.

Drive the vehicle. If

comes on

and stays on, the vehicle may need
more time to diagnose the problem.
If the condition persists, see your
dealer.

Turning the Systems Off
and On

To turn the system off, press the
TCS/StabiliTrak button.

Caution

Do not repeatedly brake or
accelerate heavily when TCS is
off. The vehicle driveline could be
damaged.

To turn off only TCS, press and
release the TCS/StabiliTrak button.
The traction off light

displays in

the instrument cluster.

To turn TCS on again, press and
release the TCS/StabiliTrak button.
The traction off light

displayed in

the instrument cluster will turn off.

If TCS is limiting wheel spin when
the TCS/StabiliTrak button is
pressed, the system will not turn off
until the wheels stop spinning.

To turn off both TCS and StabiliTrak,
press and hold the TCS/StabiliTrak
button until the traction off light

and StabiliTrak OFF light

come

on and stay on in the instrument
cluster.

To turn TCS and StabiliTrak on
again, press and release the TCS/
StabiliTrak button. The traction off
light

and StabiliTrak OFF light

in the instrument cluster turn off.

Adding accessories can affect the
vehicle performance. See

Accessories and Modifications

227

Summary of Contents for Malibu Limited 2016









































































































































































































































































































































































Search results

Summary of Contents for Malibu Limited 2016

Reviews:

Related manuals for Malibu Limited 2016

Brands by name

Popular brands

Chevrolet Malibu Limited 2016, Service Manual

Search results

Summary of Contents for Malibu Limited 2016

Reviews:

Related manuals for Malibu Limited 2016

Brands by name

Popular brands