manualshive.com logo in svg

Chevrolet Malibu Limited 2016, Service Manual

Share
Download
Chevrolet Malibu Limited 2016 Service Manual Download Page 250

Chevrolet Malibu Limited Owner Manual (GMNA-Localizing-U.S/Canada-

9086425) - 2016 - crc - 5/12/15

Vehicle Care

249

that the filler neck clip engages
into the underhood electrical
center retainer.

HID Headlamp Assembly

The HID assembly has a high
intensity discharge (HID) high/low
beam, a DRL/parking lamp,
sidemarker lamp, and a turn signal
lamp on the headlamp assembly.

For replacement of the headlamp on
an HID assembly, contact your
dealer. See

High Intensity

Discharge (HID) Lighting

0

246

.

Passenger Side Shown, Driver
Side Similar

1. Turn Signal Lamp
2. DRL/Parking Lamp
3. Sidemarker Lamp

Front Turn Signal, Parking, and
Sidemarker Lamps

To replace one of these lamps on a
base, uplevel, or HID assembly:

1. For the driver side bulb,

remove the windshield washer
bottle filler neck by firmly
pulling it straight up and out of
the bottle.

2. Remove the bulb socket from

the headlamp assembly by
turning it counterclockwise.

3. Remove the bulb from the

socket.

4. Replace the bulb in the bulb

socket.

5. Install the bulb socket in the

headlamp assembly by turning
it clockwise.

6. For the driver side, reinstall the

windshield washer bottle filler
neck by firmly pushing it
straight into the bottle. Ensure
that the filler neck clip engages
into the underhood electrical
center retainer.

Fog Lamps

To replace the front fog lamp bulb:

1. Remove the five access panel

fasteners under the front
fascia.

2. Lower the panel far enough to

access the fog lamp bulb.

Summary of Contents for Malibu Limited 2016









































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands