Black plate (17,1)
Chevrolet Impala Owner Manual (GMNA-Localizing-U.S./Canada-5772216) -
2014 - 2nd crc - 5/14/13
Vehicle Care
10-17
3. Disconnect the secondary air
hose (2) (if equipped).
4. Disconnect the electrical
connector (3).
5. Disconnect the outlet duct by
loosening the air duct clamp (4).
6. Lift the filter cover housing away
from the engine air cleaner/filter
housing.
7. Pull out the filter.
8. Inspect or replace the engine air
cleaner/filter.
9. Reverse Steps 2
–
5 to reinstall
the filter cover housing.
3.6L V6 Engine
1. Screws
2. Secondary Air Hose (If
Equipped)
3. Electrical Connector
4. Air Duct Clamp
To inspect or replace the engine air
cleaner/filter:
1. Open the hood. See
Hood on
page 10-4
.
2. Remove the screws (1) on top of
the engine air cleaner/filter
housing.
3. Disconnect the secondary air
hose (2) (if equipped).
4. Disconnect the electrical
connector (3).
5. Disconnect the outlet duct by
loosening the air duct clamp (4).
6. Lift the filter cover housing away
from the engine air cleaner/filter
housing.
7. Pull out the filter.
8. Inspect or replace the engine air
cleaner/filter.
9. Reverse Steps 2
–
5 to reinstall
the filter cover housing.
{
Warning
Operating the engine with the air
cleaner/filter off can cause you or
others to be burned. The air
cleaner not only cleans the air; it
helps to stop flames if the engine
backfires. Use caution when
working on the engine and do not
drive with the air cleaner/filter off.