Chevrolet Express Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
13882570) - 2020 - CRC - 6/18/19
32
Seats and Restraints
1. Position the seat into the open
slots in both rails. Push the
seat forward in the rail, hooking
both seat bases onto the pins
inside of the rails.
2. Locate the hole in the rail to
install the locking pins at the
rear of the seat base. If the
vehicle is equipped with a vinyl
floor covering, pull the flap that
has been cut into the vinyl.
3. Insert the locking pins into the
seat base and push the seat to
line up the pins with the base.
On a three-passenger seat, the
pin with the black cap
marked
“
R
”
must be installed
on the right side and the pin
with the gray cap marked
“
L
”
must be installed on the
left side.
On a four-passenger seat, the
pins marked
“
R
”
must be
installed on the half of the seat
on the right side. The pins
marked
“
L
”
must be installed on
the half of the seat on the
left side.
Carpet Floor Covering
Vinyl Floor Covering
4. Push the pin(s) marked
“
R
”
down until they are in the
retaining clip. If equipped with
a locking ring, ensure the ring
is open, place the pin inside
the ring, and secure the pin
with the lock ring.
5. Pull on the pin to ensure the
lock ring is closed.
