Chevrolet Express Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
13882570) - 2020 - CRC - 6/18/19
Instruments and Controls
107
To select a setting, press
V
while
the desired setting is displayed on
the DIC.
REMOTE DOOR UNLOCK
This feature allows you to select the
type of feedback you will receive
when unlocking the vehicle with the
Remote Keyless Entry (RKE)
transmitter. You will not receive
feedback when unlocking the
vehicle with the RKE transmitter if
the doors are open. See
Keyless Entry (RKE) System
Operation
.
Press
U
until REMOTE DOOR
UNLOCK appears on the DIC
display. Press
V
once to access the
settings for this feature. Then
press
U
to scroll through the
following settings:
LIGHTS OFF :
The exterior lamps
will not flash when you press
K
on
the RKE transmitter.
LIGHTS ON (default) :
The exterior
lamps will flash when you press
K
on the RKE transmitter.
NO CHANGE :
No change will be
made to this feature. The current
setting will remain.
To select a setting, press
V
while
the desired setting is displayed on
the DIC.
DELAY DOOR LOCK
This feature allows you to select
whether or not the locking of the
doors will be delayed. When locking
the doors with the power door lock
switch and a door is open, this
feature will delay locking the doors
until five seconds after the last door
is closed. You will hear three chimes
to signal that the delayed locking
feature is in use. The key must be
out of the ignition for this feature to
work. You can temporarily override
delayed locking by pressing the
power door lock switch twice or
Q
on the RKE transmitter twice. See
Press
U
until DELAY DOOR
LOCK appears on the DIC display.
Press
V
once to access the settings
for this feature. Then press
U
to
scroll through the following settings:
OFF :
There will be no delayed
locking of the vehicle's doors.
ON (default) :
The doors will not
lock until five seconds after the last
door is closed.
NO CHANGE :
No change will be
made to this feature. The current
setting will remain.
To select a setting, press
V
while
the desired setting is displayed on
the DIC.
EXIT LIGHTING
This feature allows you to select the
amount of time you want the
exterior lamps to remain on when it
is dark enough outside. This
happens after the key is turned from
on to off.
