Chevrolet Express 2004 Owner'S Manual Download Page 332

Page: 332 / 406

1. Check under the vehicle to see if the cable end is

visible.

2. If the cable is not visible, start this procedure at

Step 6.

3. Turn the wrench counterclockwise until

approximately 6 inches (15 cm) of cable is exposed.

4. Connect the jack handle (C) and jack handle

extension (B) together and press the retention
clip (arrow) so it engages.

5. Attach the jack handle/jack handle extension to the

jack and slide the ratchet with the UP mark facing
you onto the end of the jack handle extension
so your set-up looks like the picture above.

5-82

ofrecido por www.electromanuales.com

Summary of Contents for Express 2004























































































































































































































































































































































































































Search results

Summary of Contents for Express 2004

Reviews:

Related manuals for Express 2004

Brands by name

Popular brands

Chevrolet Express 2004, Owner'S Manual

Search results

Summary of Contents for Express 2004

Reviews:

Related manuals for Express 2004

Brands by name

Popular brands