Chevrolet Corvette Owner Manual (GMNA-Localizing-Europe-15352645) -
2022 - CRC - 6/22/21
80
Seats and Restraints
Position the release button on the
buckle, away from the child restraint, so
that the seat belt can be quickly
unbuckled if necessary.
6. Pull the shoulder belt all the way out of
the retractor to set the lock. When the
retractor lock is set, the belt can be
tightened but not pulled out of the
retractor.
7. To tighten the belt, push down on the
child restraint, pull the shoulder portion
of the belt to tighten the lap portion of
the belt, and feed the shoulder belt back
into the retractor. When installing a
forward-facing child restraint, it may be
helpful to use your knee to push down
on the child restraint as you tighten
the belt.
Try to pull the belt out of the retractor
to make sure the retractor is locked.
If the retractor is not locked, repeat
Steps 6 and 7.
8. Before placing a child in the child
restraint, make sure it is securely held in
place. To check, grasp the child restraint
at the seat belt path and attempt to
move it side to side and back and forth.
When the child restraint is properly
installed, there should be no more than
2.5 cm (1 in) of movement.
If the airbag is off, the off indicator in the
passenger airbag status indicator will come
on and stay on when the vehicle is started.
If a child restraint has been installed and
the on indicator is lit, see
“
If the On
Indicator Is Lit for a Child Restraint
”
under
Passenger Sensing System (For Left-hand
Drive Vehicles with a Passenger Sensing
System)
To remove the child restraint, unbuckle the
vehicle seat belt and let it return to the
stowed position.
Return the seat belt into the guide by
sliding the webbing through the opening on
the guide.
Securing Child Restraints (For
Right-hand Drive Vehicles without
a Passenger Sensing System)
This vehicle has airbags.
