![Chevrolet CORVETTE Owner'S Manual Download Page 224](http://html1.mh-extra.com/html/chevrolet/corvette/corvette_owners-manual_2597461224.webp)
Chevrolet Corvette Owner Manual (GMNA-Localizing-Europe-15352645) -
2022 - CRC - 6/22/21
Driving and Operating
223
Warning (Continued)
excessive wheel slip, and you could lose
control. Do not use cruise control on
slippery roads.
If the Traction Control System (TCS) begins
to limit wheel spin while you are using
cruise control, the cruise control
automatically disengages. See
Control/Electronic Stability Control
When road conditions allow for using safely
again, cruise control can be turned back on.
If the brakes are applied, cruise control
disengages.
Cruise control will disengage if either TCS or
StabiliTrak/Electronic Stability Control (ESC)
is turned off.
1
:
Press to turn cruise control on or off.
A white indicator comes on in the
instrument cluster when cruise is turned on.
+RES :
If there is a set speed in memory,
press briefly to resume to that speed or
press and hold to accelerate. If cruise control
is already engaged, use to increase vehicle
speed.
SET
−
:
Press briefly to set the speed and
activate cruise control. If cruise control is
already engaged, use to decrease vehicle
speed.
*
:
Press to disengage cruise control
without erasing the set speed from memory.
The speedometer reading can be displayed
in either English or metric units. See
. The increment
value used depends on the units displayed.
Setting Cruise Control
If
1
is on when not in use, SET
–
or +RES
could get pressed and go into cruise when
not desired. Keep
1
off when cruise is not
being used.
1. Press
1
to turn the cruise system on.
2. Get up to the desired speed.
3. Press and release SET
–
on the steering
wheel.
4. Remove foot from the accelerator.
The cruise control indicator on the
instrument cluster turns green after cruise
control has been set to the desired speed.
See
.
Resuming a Set Speed
If the cruise control is set at a desired speed
and then the brakes are applied or
*
is
pressed, the cruise control is disengaged
without erasing the set speed from memory.
Once the vehicle reaches about 40 km/h
(25 mph) or more, briefly press +RES. The
vehicle returns to the previous set speed.