6
A. Seat Adjustment
Move the front control to move the seat
forward or rearward, or to tilt, raise or
lower the seat.
B. Seatback Recline Adjustment
Move the top of the vertical control to
recline or raise the seatback.
C. Lumbar/Side Bolster Adjustment
F
Move the rear control forward or rearward to adjust the lumbar support and up or
down to adjust the side bolsters.
MEMORY SEATS
F
To set the memory position, adjust the driver’s seat, outside mirrors and steering
wheel to the desired positions. Press and release the
SET button. A beep will sound.
Immediately press and hold button
1 or 2 until two beeps sound.
To set the exit position, adjust the driver’s seat and steering wheel to the desired
positions. Press and release the
SET button. A beep will sound. Immediately press and
hold the
EXIT button until two beeps sound.
To recall the setting at any time, press and hold button
1 or 2 or the
EXIT button
until the stored position is reached.
To set the Auto Memory Recall (Driver Door Open or At Ignition On) or Easy Exit Recall
(Vehicle Off and Driver Door Open), go to Settings > Vehicle > Comfort and
Convenience > Auto Memory Recall or Easy Exit Options.
Note: On vehicles with a manual transmission, the parking brake must be applied in order for the
memory seats to be recalled automatically.
If the stored position is not recalled, move the seat forward and press button
1 or 2 or the
EXIT button again.
POWER SEATS
KEYLESS (PUSHBUTTON) START
STARTING THE ENGINE
With the vehicle in Park or Neutral,
press the brake pedal (automatic
transmission) or the clutch pedal
(manual transmission) and then press
the
ENGINE START/STOP button.
STOPPING THE ENGINE/OFF
Shift to Park (automatic transmission
only) and press the
ENGINE START/
STOP button.
The Remote Keyless Entry transmitter must be in the vehicle to turn on the ignition.
SEAT CONTROLS
See Driving and Operating in your Owner’s Manual.
F
Optional equipment
See Seats and Restraints in your Owner’s Manual.
A
B C
