Chevrolet Captiva 2007, Owner'S Handbook Manual

Page: 273 / 321

Chevrolet Captiva Owner Manual (GMK-Localizing-Other IO/GMSA-
9507207) - 2016 - crc - 9/22/15
272 Vehicle Care
inflation pressure, inflate the
tire to the recommended
inflation pressure.
20. Wipe off any sealant from the
wheel, tire or vehicle.
21. Dispose of the used sealant
canister (5) and sealant/air
hose (7) assembly at a local
dealer or in accordance with
local regulations and practices.
22. Replace it with a new canister
available from your dealer.
23. After temporarily sealing a tire
using the tire sealant and
compressor kit, take the
vehicle to an authorized dealer
within a 161 km (100 mi) of
driving to have the tire repaired
or replaced.
Using the Tire Sealant and
Compressor Kit without
Sealant to Inflate a Tire (Not
Punctured)
To use the air compressor to inflate
a tire with air only and not sealant:
If a tire goes flat, avoid further tire
and wheel damage by driving slowly
to a level place. Turn on the hazard
warning flashers.
Hazard Warning
Flashers
0
124 .
If a Tire Goes Flat
0
266 .
1. Remove the tire sealant and
compressor kit from its storage
location.
Storing the Tire
Sealant and Compressor
Kit
0
274
2. Unwrap the air only hose (6)
and the power plug (8).
3. Place the kit on the ground.
Make sure the tire valve stem
is positioned close to the
ground so the hose will
reach it.
4. Remove the tire valve stem
cap by turning it
counterclockwise.
5. Attach the air only hose (6)
onto the tire valve stem and
turn it clockwise until tight.
6. Plug the power plug (8) into the
accessory power outlet in the
vehicle. Unplug all items from
other accessory power outlets.
Power Outlets
0
95 .
Do not pinch the power plug
cord in the door or window.