Chevrolet Captiva 2007, Owner'S Handbook Manual

Page: 24 / 321

Chevrolet Captiva Owner Manual (GMK-Localizing-Other IO/GMSA-
9507207) - 2016 - crc - 9/22/15
In Brief 23
Performance and
Maintenance
Traction Control/
Electronic Stability
Control
The Traction Control System (TCS)
limits wheel spin. The system turns
on automatically every time the
vehicle is started.
The Electronic Stability Control
(ESC) system assists with
directional control of the vehicle in
difficult driving conditions. The
system also turns on automatically
every time the vehicle is started.
. To turn off TCS and ESC, press
and release the button
g
on the
instrument panel.
g
illuminates
on the instrument cluster.
.
Press and release the button
again to turn on both systems.
Traction Control/Electronic Stability
Control
0
204 .
Tire Pressure Monitor
This vehicle may have a Tire
Pressure Monitor System (TPMS).
The low tire pressure warning light
alerts to a significant loss in
pressure of one of the vehicle's
tires. If the warning light comes on,
stop as soon as possible and inflate
the tires to the recommended
pressure shown on the Tire and
Loading Information label.
Vehicle
Load Limits
0
182 . The warning light
will remain on until the tire pressure
is corrected.
The low tire pressure warning light
may come on in cool weather when
the vehicle is first started, and then
turn off as the vehicle is driven. This
may be an early indicator that the
tire pressures are getting low and
the tires need to be inflated to the
proper pressure.
The TPMS does not replace normal
monthly tire maintenance. Maintain
the correct tire pressures.
Tire Pressure Monitor
System
0
262
.
Engine Oil Life System
The engine oil life system calculates
engine oil life based on vehicle use
and displays the CHANGE ENGINE
OIL SOON message when it is time
to change the engine oil and filter.
The oil life system should be reset
to 100% only following an oil
change.
Resetting the Oil Life System
Reset the system whenever the
engine oil is changed so that the
system can calculate the next
engine oil change.
1. Turn the ignition key to ON/
RUN with the engine off.
2. Fully press and release the
accelerator pedal three times
within five seconds.