Chevrolet 6500XD 2022 Owner'S Manual Download Page 88

Page: 88 / 312

Chevrolet Low Cab Forward 6.7L Diesel Engine 6500XD (GMNA-Localizing-

U.S.-15749874) - 2022 - CRC - 12/1/21

Infotainment System

Category

Order for the display of the SONGS

selection mode

PLAYING

SONGS

PLAYLISTS

→

SONGS

ARTISTS

→

ALBUMS

→

SONGS

ALBUMS

→

SONGS

PODCASTS

→

EPISODES

GENRES

→

ARTISTS

→

ALBUMS

→

SONGS

COMPOSERS

→

ALBUMS

→

SONGS

AUDIOBOOKS

AUDIO BOOKS

→

(CHAPTERS)

Follow the operations below to play music
files:

Select a music file in the list at the
lowest hierarchy level to play.

Press BACK while displaying the list at the
middle hierarchy level.

Display Text Information

1. Press and hold down LIST for more than

one second.

2. Turn MODE/

/ENTER to select the

display item of your choice, and then
press ENTER.

The display item changes in the
following order.
TR NO/TIME (File number/Playback time)

↔

ALBUM (Album title)

↔

TRACK

(Track title)

↔

ARTIST (Artist name)

↔

TR NO/TIME...

If the text information is too long to fit
into the display window, press and hold
down FUNC for more than one second to
switch to the next page.

Texts recorded with characters other than
alphanumeric characters and symbols will
appear as "*" (asterisks).

If there is no text information stored in a
music file, NO TITLE is displayed.

If ERROR Appears in the Display

The following messages are displayed (blink)
according to the status.

Summary of Contents for 6500XD 2022

























































































































































































































































































































Search results

Summary of Contents for 6500XD 2022

Reviews:

Brands by name

Popular brands

Chevrolet 6500XD 2022, Owner'S Manual

Search results

Summary of Contents for 6500XD 2022

Reviews:

Brands by name

Popular brands