Chevrolet 6500XD 2022 Owner'S Manual Download Page 293

Page: 293 / 312

Chevrolet Low Cab Forward 6.7L Diesel Engine 6500XD (GMNA-Localizing-

U.S.-15749874) - 2022 - CRC - 12/1/21

292

Technical Data

Oil filter

Cartridge (spin on) type

Engine oil capacity

When changing oil and filter:

15.1 L (16.0 qt)

Engine coolant capacity

31.2 L (33.0 qt)

Preheating system

Grid heater

Transmission Specifications

Model

ALLISON2550RDS
Six-speed automatic transmission (overdrive gear for 5th and 6th), lock-up clutch for 2nd to 6th

Gear ratio

1st

3.512

2nd

1.896

3rd

1.439

4th

1.000

5th

0.737

6th

0.643

Reverse

5.090

Transmission oil capacity

14.0 L (14.8 qt)*1

Weights

Axle weight rating: Front

Tire size 11R22.5: 5,443 kg (12,000 lb)

Tire size 255/70R22.5: 4,989 kg (11,000 lb)

Summary of Contents for 6500XD 2022

























































































































































































































































































































Search results

Summary of Contents for 6500XD 2022

Reviews:

Brands by name

Popular brands

Chevrolet 6500XD 2022, Owner'S Manual

Search results

Summary of Contents for 6500XD 2022

Reviews:

Brands by name

Popular brands