Chevrolet 2013 SONIC, Owner'S Manual

Page: 172 / 382

Black plate (40,1)
Chevrolet Sonic Owner Manual - 2013 - 2nd PrintReady - 10/11/12
7-40 Infotainment System
Making a Call
Calls can be made using the
following commands.
Dial or Call: The dial or call
command can be used
interchangeably to dial a phone
number or a stored name tag.
Digit Dial: This command allows a
phone number to be dialed by
entering the digits one at a time.
Re-dial: This command is used to
dial the last number used on the cell
phone.
Using the “ Dial ” or “ Call ”
Command
1. Press
b
/
g
. The system
responds “ Ready, ” followed by
a tone.
2. Say “ Dial ” or “ Call. ”
3. Say the entire number without
pausing or say the name tag.
Once connected, the person called
will be heard through the audio
speakers.
Calling 911 Emergency Number
1. Press
b
/
g
. The system
responds “ Ready, ” followed by
a tone.
2. Say “ Dial ” or “ Call ” . ”
3. Say “ 911. ”
4. Say “ Dial ” or “ Call ” . ”
Using the “ Digit Dial ” Command
The digit dial command allows a
phone number to be dialed by
entering the digits one at a time.
After each digit is entered, the
system repeats back the digit it
heard followed by a tone.
If an unwanted number is
recognized by the system, say
“ Clear ” at any time to clear the last
number.
To hear all of the numbers
recognized by the system, say
“ Verify ” at any time.
1. Press
b
/
g
. The system
responds “ Ready, ” followed by
a tone.
2. Say “ Digit Dial. ”
3. Say each digit, one at a time,
that you want to dial. After each
digit is entered, the system
repeats back the digit it heard
followed by a tone. After the last
digit has been entered,
say
“ Dial. ”
Once connected, the person called
will be heard through the audio
speakers.
Using the “ Re-dial ” Command
1. Press
b
/
g
. The system
responds “ Ready, ” followed by
a tone.
2. After the tone, say “ Re-dial. ” The
system dials the last number
called from the connected cell
phone.
Once connected, the person called
will be heard through the audio
speakers.