Chevrolet 2013 Full-Size Truck Owner'S Manual Download Page 32

Page: 32 / 102

Black plate (32,1)

Chevrolet Full-Size Truck and Van Navigation System - 2013 - crc 1st edition -

4/2/12

Infotainment System

Playing Audio Book Content

After activating and transferring
audible.com files to the system, play
the files by:

1. Press SRCE until the HDD

source is selected.

2. Enter the HDD Menu: the HDD

Music Menu displays. Scroll
down to the Audio Book option
and select.

3. The Audio Book screen displays

a list of the available audio
books for playback. Select
a book.

4. Then, select a chapter to start

playback.

5. The audio book begins

playback.

Selecting Another Audio Book

To play a different audio book from
the one selected, return to the Audio
Book menu options.

Summary of Contents for 2013 Full-Size Truck







































































































Search results

Summary of Contents for 2013 Full-Size Truck

Reviews:

Related manuals for 2013 Full-Size Truck

Brands by name

Popular brands

Chevrolet 2013 Full-Size Truck, Owner'S Manual

Search results

Summary of Contents for 2013 Full-Size Truck

Reviews:

Related manuals for 2013 Full-Size Truck

Brands by name

Popular brands