Chevrolet 2010 Silverado, Owner'S Manual

Page: 99 / 626

Example — Rear Driver's Side Position
2. 1. When using a child restraint with a top tether
in the rear driver side position:
A. Raise the headrest or head restraint .
B. Route the top tether (B) between the
headrest or head restraint posts, through
the loop (A), behind the inboard headrest
or head restraint post, and under the
center shoulder belt (C).
C. Attach the top tether (B) to the top tether
anchor (loop) (D) at the center rear
seating position.
2. 2. When using a child restraint with a top tether
in the rear center position:
A. Route the top tether (B) through the
center loop (D), and behind the inboard
passenger side headrest or head
restraint post.
B. Attach the top tether (B) to the top tether
anchor (loop) at the rear passenger side
seating position.
2. 3. When using a child restraint with a top tether
in the rear passenger position:
A. Raise the headrest or head restraint .
B. Route the top tether (B) between the
headrest or head restraint posts, through
the loop on the passenger side and
behind the inboard headrest or head
restraint post.
C. Attach the top tether (B) to the top tether
anchor (loop) (D) at the center rear
seating position.
2. 4. Tighten the top tether when and as the child
restraint manufacturer's instructions say.
When the top tether is tightened, the anchor
(loop) may bend. This is normal and will not
damage the vehicle.
3. Push and pull the child restraint in different
directions to be sure it is secure.
2-57