Home
/
Chevrolet
/
2010 Silverado
/
Owner'S Manual

Chevrolet 2010 Silverado, Owner'S Manual

Share

Page: 553 / 626

Chevrolet 2010 Silverado Owner'S Manual Download Page 553

3. Assemble the wheel blocks (B) and jack (G)

together with the wing nut (A) and retaining
bolt (H).

4. Position the jack (G) in the mounting bracket (F).

Position the holes in the base of the jack (G) onto
the pin in the mounting bracket (F).

5. Return them to their original location in the vehicle.

For more information, refer to

Removing the Spare

Tire and Tools on page 6

‑

92

for more information.

Spare Tire

Your vehicle, when new, had a fully-inflated spare tire.
A spare tire may lose air over time, so check its inflation
pressure regularly. See

Inflation - Tire Pressure on

page 6

‑

73

and

Loading the Vehicle on page 5

‑

29

for

information regarding proper tire inflation and loading
your vehicle. For instruction on how to remove, install or
store a spare tire, see

Removing the Flat Tire and

Installing the Spare Tire on page 6

‑

97

and

Storing a

Flat or Spare Tire and Tools on page 6

‑

106

.

Notice:

If the vehicle has four-wheel drive and the

different size spare tire is installed on the vehicle,
do not drive in four-wheel drive until you can have
your flat tire repaired and/or replaced. You could
damage the vehicle, and the repair costs would not
be covered by your warranty. Never use four-wheel
drive when the different size spare tire is installed
on the vehicle.

Your vehicle may have a different size spare tire than
the road tires originally installed on your vehicle. This
spare tire was developed for use on your vehicle, so it
is all right to drive on it. If your vehicle has four-wheel
drive and the different size spare tire is installed, keep
the vehicle in two-wheel drive.

After installing the spare tire on your vehicle, you should
stop as soon as possible and make sure the spare tire
is correctly inflated. Have the damaged or flat road tire
repaired or replaced as soon as you can and installed
back onto your vehicle. This way, the spare tire will be
available in case you need it again.

Do not mix tires and wheels of different sizes, because
they will not fit. Keep your spare tire and its wheel
together. If your vehicle has a spare tire that does not
match your vehicle's original road tires and wheels in
size and type, do not include the spare in the tire
rotation.

6-109

«
...
551
552
553
554
555
...
»

Summary of Contents for 2010 Silverado



















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands