Chevrolet 2010 Equinox Owner'S Manual Download Page 314

Page: 314 / 410

9-36

Vehicle Care

5. Disconnect the lamp wiring

harness.

6. Turn the bulb socket

counterclockwise and pull it out.

7. Pull the bulb straight out of the

socket.

8. Install the new bulb.

9. Push the bulb socket in and turn

it clockwise.

10. Reverse steps 2 through 5 to

reinstall lamp assembly.

License Plate Lamp

To replace one of these bulbs:

1. Open the liftgate partway. See

Liftgate (Manual) on page 1

‑

Liftgate (Power) on

page 1

‑

for more information.

Passenger side shown, driver side

similar

2. Push the left end of the lamp

assembly towards the right.

3. Pull the lamp assembly down to

remove from liftgate.

A. Bulb Socket

B. Bulb

C. Lamp Assembly

4. Turn the bulb socket (A)

counterclockwise to remove from
lamp assembly (C).

5. Pull the bulb (B) straight out of

the bulb socket.

Summary of Contents for 2010 Equinox



























































































































































































































































































































































































































Search results

Summary of Contents for 2010 Equinox

Reviews:

Related manuals for 2010 Equinox

Brands by name

Popular brands

Chevrolet 2010 Equinox, Owner'S Manual

Search results

Summary of Contents for 2010 Equinox

Reviews:

Related manuals for 2010 Equinox

Brands by name

Popular brands