Chevrolet 2010 Equinox Owner'S Manual Download Page 30

Page: 30 / 410

2-4

Seats and Restraints

Power Seat Adjustment

Driver Seat with Power Seat

Control, Power Recline,

and Power Lumbar shown

Memory Seat Adjustment

Power Seat Adjustment

Power Recline Adjustment

Power Lumbar Adjustment

Driver Seat with Power Seat

Control, Power Lumbar,

and Manual Recline shown

Power Lumbar Adjustment

Power Seat Adjustment

Manual Recline Adjustment

On vehicles with power seats, the
controls are located on the outboard
side of the seats.

Adjust the power seat by moving the
control (B) forward or rearward, up
or down, or by pressing the top or
bottom of control (E).

Adjust the seatback by moving the
control (C) forward or rearward.

See

Reclining Seatbacks on

page 2

‑

for more information.

Adjust the lumbar support by
using the control (D). See

Lumbar

Adjustment on page 2

‑

for

more information.

Memory Seats

The vehicle may have a memory
seat allowing saved and recalled
seat settings. Controls (A) are
located on the outboard side of
the seat.

Summary of Contents for 2010 Equinox



























































































































































































































































































































































































































Search results

Summary of Contents for 2010 Equinox

Reviews:

Related manuals for 2010 Equinox

Brands by name

Popular brands

Chevrolet 2010 Equinox, Owner'S Manual

Search results

Summary of Contents for 2010 Equinox

Reviews:

Related manuals for 2010 Equinox

Brands by name

Popular brands