Chevrolet 2009 Colorado Owner'S Manual Download

Page: 343 / 418

Store the tire under the rear of the vehicle in the spare
tire carrier.

1. Put the tire on the ground at the rear of the vehicle

with the valve stem pointed down.

2. Tilt the retainer downward and through the center

wheel opening. Make sure the retainer is fully
seated across the underside of the wheel.

3. Assemble the wheel wrench, the jack handle

extensions, and the jack handle as shown.

5-93

Summary of Contents for 2009 Colorado



































































































































































































































































































































































































































Search results

Summary of Contents for 2009 Colorado

Reviews:

Related manuals for 2009 Colorado

Brands by name

Popular brands

Chevrolet 2009 Colorado, Owner'S Manual

Search results

Summary of Contents for 2009 Colorado

Reviews:

Related manuals for 2009 Colorado

Brands by name

Popular brands