Chevrolet 2009 Colorado Owner'S Manual Download

Page: 335 / 418

If the flat tire is on the rear, position the jack under
the rear axle and get as close as possible to the
shock absorber.

5. Make sure the jack head is positioned so that the

rear axle is resting securely between the grooves
that are on the jack head.

6. Turn the wheel wrench clockwise to raise the

vehicle. Raise the vehicle far enough off the ground
so there is enough room for the spare tire to fit
under the wheel well.

7. Remove all the wheel

nuts and the flat tire.

Rear Position

5-85

Summary of Contents for 2009 Colorado



































































































































































































































































































































































































































Search results

Summary of Contents for 2009 Colorado

Reviews:

Related manuals for 2009 Colorado

Brands by name

Popular brands

Chevrolet 2009 Colorado, Owner'S Manual

Search results

Summary of Contents for 2009 Colorado

Reviews:

Related manuals for 2009 Colorado

Brands by name

Popular brands