Chevrolet 2009 Colorado Owner'S Manual Download Page 328

Page: 328 / 418

Removing the Spare Tire and Tools

A. Wing Nut

B. Storage Bag and Tools

The tools you will need are located under the right front
passenger seat.

1. Move the seat all the way forward to locate the

tool bag.

2. Locate the wing nut (A) used to retain the storage

bag and tools (B). Turn it counterclockwise to
release the bag.

Put the tools to the side while you access the jack and
wheel blocks.

Regular/Extended Cab

For regular and extended cab vehicles, the jack and
wheel blocks are located under the cover at the center
of the vehicle behind the front seats.

1. Turn the wing nut on the cover counterclockwise to

remove it.

5-78

Summary of Contents for 2009 Colorado



































































































































































































































































































































































































































Search results

Summary of Contents for 2009 Colorado

Reviews:

Chevrolet 2009 Colorado, Owner'S Manual, Page: 328 / 418

Search results

Summary of Contents for 2009 Colorado

Reviews: