Chevrolet 2008 TrailBlazer Owner'S Manual Download Page 244

Page: 244 / 472

When the StabiliTrak

system is both on and
actively controlling
the stability of the vehicle,
the StabiliTrak

light

will blink for the duration of
the event.

You may also feel or hear the system working. This is
normal.

The StabiliTrak

disable

button is located on the
transmission shift handle.

For vehicles with four-wheel drive, the StabiliTrak

system is automatically disabled in 4LO mode
and cannot be turned on until the vehicle is switched to
2HI, 4HI, or 4AWD.

The StabiliTrak

system has three modes of operation:

STABILITRAK ON, TRACTION CONTROL OFF,
and STABILITRAK OFF.

STABILITRAK ON -The vehicle will default to
STABILITRAK ON every time the driver starts the
vehicle. The StabiliTrak

light will be off and no DIC

messages will be displayed.

TRACTION CONTROL OFF - The driver can modify the
engine speed management system by momentarily
pressing the StabiliTrak

button on the transmission shift

handle. The StabiliTrak

light will come on and

TRACTION CONTROL OFF will be displayed. For
vehicles without a DIC, the StabiliTrak

indicator light

will come on. Momentarily pressing the StabiliTrak

button again will return the system to the STABILITRAK
ON mode.

STABILITRAK OFF - The driver can turn off StabiliTrak

by pressing the StabiliTrak

button for more than

five seconds. The StabiliTrak

light will come on and

STABILITRAK OFF will be displayed. For vehicles
without a DIC, the StabiliTrak

indicator light will come

on. Momentarily pressing the StabiliTrak

button again

will return the system to the STABILITRAK ON mode.
See StabiliTrak

Off below for more information.

4-6

Summary of Contents for 2008 TrailBlazer

























































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 TrailBlazer

Reviews:

Brands by name

Popular brands

Chevrolet 2008 TrailBlazer, Owner'S Manual

Search results

Summary of Contents for 2008 TrailBlazer

Reviews:

Brands by name

Popular brands