Chevrolet 2007 Cobalt Owner'S Manual Download | Manualshive

Page: 194 / 444

background image

Playing a CD (Single CD Player)

Insert a CD partway into the slot, label side up.
The player pulls it in and the CD should begin
playing.

If the ignition or radio is turned off with a CD in the
player, it stays in the player. When the ignition or
radio is turned on, the CD starts playing where it
stopped, if it was the last selected audio source.

When a CD is inserted, the CD symbol displays.
As each new track starts to play, the track
number displays.

The CD player can play the smaller 3 inch (8 cm)
single CDs with an adapter ring. Full-size CDs and
the smaller CDs are loaded in the same manner.

If playing a CD-R, the sound quality can be reduced
due to CD-R quality, the method of recording, the
quality of the music that has been recorded, and the
way the CD-R has been handled. There can be an
increase in skipping, difficulty in finding tracks,
and/or difficulty in loading and ejecting. If these
problems occur, check the bottom surface of the
CD. If the surface of the CD is damaged, such as
cracked, broken, or scratched, the CD will not play
properly. If the surface of the CD is soiled, see

Care

of Your CDs on page 219

for more information.

If there is no apparent damage, try a known
good CD.

Notice:

If you add any label to a CD, insert

more than one CD into the slot at a time, or
attempt to play scratched or damaged CDs, you
could damage the CD player. When using the
CD player, use only CDs in good condition
without any label, load one CD at a time, and
keep the CD player and the loading slot free of
foreign materials, liquids, and debris.

Do not add any label to a CD, it could get caught
in the CD player. If a CD is recorded on a
personal computer and a description label is
needed, try labeling the top of the recorded CD
with a marking pen.

If an error displays, see “CD Messages” later in
this section.

Z

EJECT:

Press the CD eject button to eject

the CD. If the CD is not removed, after several
seconds, the CD automatically pulls back into
the player.

f

(Tune):

Turn this knob to select tracks on the

CD currently playing.

194

«
...
192
193
194
195
196
...
»

Summary of Contents for 2007 Cobalt





























































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2007 Cobalt

MARTEN-FREE CAR

Brand: Gardigo Pages: 36

Brand: Yakima Pages: 8

Brand: Roav Pages: 10

STRONGARM RVR303

Brand: Blue Giant Pages: 48

Brand: Opel Pages: 254

Brand: SAN HIMA Pages: 10

1506-PHX Cargo Plus

Brand: Ranger design Pages: 8

Brand: AUTOTECH Pages: 1

Brand: Mobileye Pages: 29

Brand: Curt Manufacturing Pages: 4

Brand: Whispbar Pages: 112

MagicSafe MSG150

Brand: Waeco Pages: 20

Brand: Husky Pages: 8

Brand: Edelbrock Pages: 2

Brand: Adaptiv Mini Pages: 4

Brand: Subaru Pages: 90

Forester 2.5X 2003

Brand: Subaru Pages: 44

Brand: Prorack Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands