Automatic Transaxle Operation
If your vehicle has an automatic transaxle, the
shift lever is located on the console between
the seats.
There are several
different positions for
the automatic transaxle.
PARK (P):
This position locks your front wheels.
It is the best position to use when you start
your engine because your vehicle cannot
move easily.
{
CAUTION:
It is dangerous to get out of your vehicle
if the shift lever is not fully in PARK (P)
with the parking brake firmly set. Your
vehicle can roll.
Do not leave your vehicle when the engine
is running unless you have to. If you have
left the engine running, the vehicle can
move suddenly. You or others could be
injured. To be sure your vehicle will not
move, even when you are on fairly level
ground, always set your parking brake
and move the shift lever to PARK (P).
See
Shifting Into Park (P) (Automatic
Transaxle) on page 121
. If you are pulling
a trailer, see
Towing a Trailer (Manual
Transaxle) on page 261
or
Towing a
Trailer (Automatic Transaxle) on page 261
.
Make sure the shift lever is fully in PARK (P)
before starting the engine. Your vehicle has an
automatic transaxle shift lock control system.
115
Summary of Contents for 2007 Cobalt
