Chevrolet 2006 Epica Owner'S Manual Download Page 76

Page: 76 / 368

Notice:

When replacing the battery, use care not

to touch any of the circuitry. Static from your body
transferred to these surfaces may damage the
transmitter.

To replace the battery in the remote keyless entry
transmitter, do the following:

1. Remove the screw from the back of the cover

and open the cover of the transmitter.

2. Pull the transmitter out of the cover and

carefully detach the sticker from the unit.
Keep the sticker clean.

3. Remove the battery and replace it with the new

one. Make sure the positive side of the battery
faces up. Use one three-volt, CR1616, or
equivalent, type battery.

4. Attach the sticker and put the transmitter unit in

the cover.

5. Put the two halves back together and replace the

screw. Make sure the cover is on tightly, so water
will not get in.

6. Test the transmitter operation.

2-6

Summary of Contents for 2006 Epica

















































































































































































































































































































































































Search results

Summary of Contents for 2006 Epica

Reviews:

Related manuals for 2006 Epica

Brands by name

Popular brands

Chevrolet 2006 Epica, Owner'S Manual

Search results

Summary of Contents for 2006 Epica

Reviews:

Related manuals for 2006 Epica

Brands by name

Popular brands