Chevrolet 2006 Epica Owner'S Manual Download

Page: 266 / 368

Center High-Mounted Stoplamp
(CHMSL)

To replace a CHMSL bulb, do the following:

1. From inside the vehicle, locate the center

high-mounted stoplamp (CHMSL) housing on
the underside of the rear window shelf.

2. Pry off the lamp housing with a flat tool.

3. Remove the bulb socket.

4. Remove the bulb by pulling it straight out of

the bulb socket.

5. Install the new bulb.

6. Install the bulb socket into the CHMSL.

7. Push the CHMSL housing back into its

original position.

5-42

Summary of Contents for 2006 Epica

















































































































































































































































































































































































Search results

Summary of Contents for 2006 Epica

Reviews:

Related manuals for 2006 Epica

Brands by name

Popular brands

Chevrolet 2006 Epica, Owner'S Manual

Search results

Summary of Contents for 2006 Epica

Reviews:

Related manuals for 2006 Epica

Brands by name

Popular brands