Chevrolet 2005 Aveo Owner'S Manual Download Page 247

Page: 247 / 322

5. Turn the retainer counterclockwise and remove it

from the compact spare.

6. Remove the compact spare tire. See Compact

Spare Tire on page 5-70 for more information.

Removing the Flat Tire and
Installing the Spare Tire

1. If your vehicle has wheel covers, loosen the four

plastic caps by hand or by using the wheel wrench.
The plastic nuts do not come off of the cover.

2. Remove the wheel cover using the flat end of the

jack handle or the screwdriver. Pry along the edge
of the wheel cover until it comes off.

3. Use the wheel wrench to loosen all the wheel nuts.

Do not remove them yet.

5-65

Summary of Contents for 2005 Aveo



































































































































































































































































































































Search results

Summary of Contents for 2005 Aveo

Reviews:

Chevrolet 2005 Aveo, Owner'S Manual, Page: 247 / 322

Search results

Summary of Contents for 2005 Aveo

Reviews: