Chevrolet 2005 Aveo Owner'S Manual Download Page 12 | Manualshive

Page: 12 / 322

Chevrolet 2005 Aveo Owner'S Manual Download Page 12

Rear Seats

Rear Seat Operation (Sedan)

Folding the Seatback

The rear seatbacks can be folded down to increase
cargo space.

To fold down the seatback, do the following:

1. If your vehicle has adjustable head restraints, push

the head restraints all the way.

2. Pull up the release knob located on top of the rear

seatback.

3. Fold the rear seatback forward and down.

4. Move the safety belts out of the space between the

seatback and the seat cushion so they are not in
the way as the seat is being folded.

{

CAUTION:

If the seatback is not locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
press rearward on the seatback to be sure it is
locked.

1-6

«
...
10
11
12
13
14
...
»

Summary of Contents for 2005 Aveo



































































































































































































































































































































Reviews:

No comments