Chevrolet 2005 Aveo Owner'S Manual Download Page 22 | Manualshive

Page: 22 / 322

Chevrolet 2005 Aveo Owner'S Manual Download Page 22

3. Pick up the latch plate and pull the belt across you.

Do not let it get twisted.

The shoulder belt may lock if you pull the belt
across you very quickly. If this happens, let the belt
go back slightly to unlock it. Then pull the belt
across you more slowly.

4. Push the latch plate into the buckle until it clicks.

Pull up on the latch plate to make sure it is secure.
If the belt is not long enough, see Safety Belt
Extender on page 1-27.
Make sure the release button on the buckle is
positioned so you would be able to unbuckle the
safety belt quickly if you ever had to.

5. To make the lap part tight, pull down on the buckle

end of the belt as you pull up on the shoulder belt.

1-16

«
...
20
21
22
23
24
...
»

Summary of Contents for 2005 Aveo



































































































































































































































































































































Reviews:

No comments