manualshive.com logo in svg

Chevrolet 2005 Astro, Owner'S Manual

Share
Download
Chevrolet 2005 Astro Owner'S Manual Download Page 320

Every 150 000 Miles (240 000 km): Cooling System
Service (or every 60 months, whichever occurs
first). Engine Accessory Drive Belt Inspection.

These intervals only summarize maintenance services.
Be sure to follow the complete scheduled maintenance
on the following pages.

Long Trip/Highway Definition

Follow this scheduled maintenance only if none of the
conditions from the Short Trip/City Scheduled
Maintenance are true. Do not use this schedule if the
vehicle is used for trailer towing, driven in a dusty area,
or used off paved roads. Use the Short Trip/City
schedule for these conditions.

Driving a vehicle with a fully warmed engine under
highway conditions will cause engine oil to break down
slower.

Long Trip/Highway Intervals

Every 7,500 Miles (12 500 km): Engine Oil and
Filter Change (or every 12 months, whichever occurs
first). Chassis Lubrication (or 12 months, whichever
occurs first). Tire Rotation.

Every 15,000 Miles (25 000 km): Engine Air Cleaner
Filter Inspection. Automatic Transmission Service
(severe conditions only).

Every 30,000 Miles (50 000 km): Fuel Filter
Replacement. Front Wheel Bearing Repack (two–wheel
drive only) (or at each brake relining, whichever
occurs first).

Every 45,000 Miles (75 000 km): Engine Air Cleaner
Filter Replacement.

Every 50,000 Miles (83 000 km): Automatic
Transmission Service (normal conditions). Transfer
Case Fluid Change.

Every 100,000 Miles (166 000 km): Spark Plug
Wire Inspection. Spark Plug Replacement. Positive
Crankcase Ventilation (PCV) Valve Inspection.

Every 150,000 Miles (240 000 km): Cooling System
Service (or every 60 months, whichever occurs
first). Engine Accessory Drive Belt Inspection.

These intervals only summarize maintenance services.
Be sure to follow the complete scheduled maintenance
on the following pages.

6-6

Summary of Contents for 2005 Astro

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands