Chevrolet 2005 Astro Owner'S Manual Download Page 10

Page: 10 / 376

Manual Lumbar

If your vehicle has this feature, there will be a knob
located on the inboard side of the driver’s and
passenger’s bucket seats.

Turn the knob toward the front of the vehicle to increase
lumbar support. Turn the knob toward the rear of the
vehicle to decrease lumbar support.

Reclining Seatbacks

There is a lever located
on the inboard side of
the seat to adjust
the seatback.

1. Lift the lever and lean back until the seatback

is at the desired position.

2. Release the lever to lock the seatback where you

want it.

To return the seatback to an upright position, pull up on
the lever and lean forward.

1-4

Summary of Contents for 2005 Astro

























































































































































































































































































































































































Search results

Summary of Contents for 2005 Astro

Reviews:

Chevrolet 2005 Astro, Owner'S Manual, Page: 10 / 376

Search results

Summary of Contents for 2005 Astro

Reviews: