Chevrolet 2004 Tahoe Owner'S Manual Download Page 46

Page: 46 / 548

2. Push the latch plate into the buckle until it clicks.

Pull up on the latch plate to make sure it is secure.

When the shoulder belt is pulled out all the way,
it will lock. If it does, let it go back all the way and
start again.

If the belt is not long enough, see Safety Belt
Extender on page 1-44.

Make sure the release button on the buckle is
positioned so you would be able to unbuckle the
safety belt quickly if you ever had to.

3. To make the lap part tight, pull down on the buckle

end of the belt as you pull up on the shoulder part.

1-40

Summary of Contents for 2004 Tahoe





































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2004 Tahoe

Reviews:

Related manuals for 2004 Tahoe

Brands by name

Popular brands

Chevrolet 2004 Tahoe, Owner'S Manual

Search results

Summary of Contents for 2004 Tahoe

Reviews:

Related manuals for 2004 Tahoe

Brands by name

Popular brands