Chevrolet 2004 Corvette, Owner'S Manual, Page: 188 / 384

3 NEXT: Your tape must have at least three seconds
of silence between each selection for next to work.
Press this pushbutton to go to the next selection on
the tape. If you hold this pushbutton or press it
more than once, the player will continue moving forward
through the tape.
4 REV (Reverse): Press this pushbutton to reverse the
tape rapidly. Press it again to return to playing speed.
The radio will play while the tape reverses.
W 5 (Dolby
®
): Press this pushbutton to reduce
background noise. The double-D symbol will appear
on the display.
Dolby
®
Noise Reduction is manufactured under a
license from Dolby
®
Laboratories Licensing Corporation.
Dolby
®
and the double-D symbol are trademarks of
Dolby
®
Laboratories Licensing Corporation.
FWD 6 (Forward): Press this pushbutton to advance
the tape rapidly. Press it again to return to playing
speed. The radio will play while the tape advances.
o
SEEK
p
: Your tape must have at least three
seconds of silence between each selection for seek to
work. Press the right or the left arrow to go to the next or
to the previous selection on the tape.
AM FM: Press this button to listen to the radio when a
cassette tape is playing. The inactive tape will remain
safely inside the radio for future listening.
TAPE AUX (Auxiliary): Press this button to play a
cassette tape when listening to the radio. The tape
symbol with an arrow will appear on the display. If your
system is equipped with a remote playback device,
pressing this button a second time will allow the remote
device to play.
EJECT: Press this button to remove the tape. EJECT
may be used with the ignition or radio off. Cassettes may
be loaded with the radio off if this button is pressed
first. If you leave a cassette tape in the player while
listening to the radio, it may become warm.
3-74