
FLAT TIRE (Except Z06): You will hear two chimes
when this message is displayed followed by the message
MAX SPEED 55 MPH (90 km/h). If this message
appears, do not drive your vehicle above this limit.
The next message to appear is REDUCED HANDLING.
Adjust your driving accordingly. To acknowledge these
warnings, press RESET. After you press RESET, a
message will reappear every 10 minutes until this
condition changes. This message indicates that the
pressure in one of your tires is lower than 5 psi (34 kPa).
Next to the FLAT TIRE message, you can see either
LF (left front), LR (left rear), RF (right front) or RR (right
rear) to indicate to you which tire is flat. You can receive
more than one tire pressure message at a time. To read
other messages that may have been sent at the same
time, press RESET. If a tire pressure message appears
on the DIC, stop as soon as you can. Have the tire
pressures checked and set to those shown on your
Tire Loading Information Label. See Extended Mobility
Tires (Except Z06) on page 5-61 and Inflation - Tire
Pressure on page 5-62.
{
CAUTION:
When the LOW TIRE PRESSURE or FLAT TIRE
message is displayed on the Driver Information
Center, your vehicle’s handling capabilities
will be reduced during severe maneuvers.
If you drive too fast, you could lose control of
your vehicle. You or others could be injured.
Don’t drive over 55 mph (90 km/h) when the
LOW TIRE PRESSURE or FLAT TIRE message
is displayed. Drive cautiously and check your
tire pressures as soon as you can.
3-60
Summary of Contents for 2004 Corvette
