Chevrolet 2004 Corvette Owner'S Manual Download Page 165

Page: 165 / 384

Press the GAGE button again to display the oil
temperature, such as:

•

OIL TEMP 234°F or

•

OIL TEMP 112°C

Press the GAGE button again to display the coolant
temperature, such as:

•

COOLANT TEMP 123°F or

•

COOLANT TEMP 51°C

Press the GAGE button again to display the automatic
transmission fluid temperature (if equipped), such as:

•

TRANS FLUID 123°F or

•

TRANS FLUID 51°C

Press the GAGE button again to display the battery
voltage, such as:

•

BATTERY VOLTS 13.5

Press the GAGE button again to display the tire
pressure for the front tires (except Z06), such as:

•

FRONT L34 R33 PSI or

•

FRONT L234 R228 kPa

Press the GAGE button again to display the tire
pressure for the rear tires (except Z06), such as:

•

REAR L34 R33 PSI or

•

REAR L234 R228 kPa

Tire pressure is not available until the vehicle has
reached a speed of 15 mph (24 km/h) or more.

3-51

Summary of Contents for 2004 Corvette

































































































































































































































































































































































































Search results

Summary of Contents for 2004 Corvette

Reviews:

Chevrolet 2004 Corvette, Owner'S Manual, Page: 165 / 384

Search results

Summary of Contents for 2004 Corvette

Reviews: