Chevrolet 2004 Aveo Owner'S Manual Download Page 233

Page: 233 / 334

6. Pull the front turn signal bulb socket out of the lamp

housing.

7. Press the bulb inward and turn it counterclockwise

to remove it from the bulb socket.

8. Install the new bulb into the socket by pressing it in

and turning it clockwise.

9. Install the socket into the lamp housing by turning it

clockwise.

10. Reverse Steps 1 through 4 to install the assembly.

Then, check the lamps.

Turn Signal Lamps (Side)

1. Remove the side turn signal lamp assembly by

pulling it forward.

2. Turn the bulb holder counterclockwise.

3. Remove the bulb from the lamp housing by pulling

the bulb straight out of the holder.

4. Install the new bulb into the bulb holder by pushing

it in and rotating the bulb holder clockwise.

5. Push the side turn signal lamp assembly back into

its original position.

5-47

Summary of Contents for 2004 Aveo















































































































































































































































































































































Search results

Summary of Contents for 2004 Aveo

Reviews:

Chevrolet 2004 Aveo, Owner'S Manual, Page: 233 / 334

Search results

Summary of Contents for 2004 Aveo

Reviews: