Home
/
Chevrolet
/
2004 Aveo
/
Owner'S Manual

Chevrolet 2004 Aveo, Owner'S Manual, Page: 195 / 334

Share

Page: 195 / 334

Chevrolet 2004 Aveo Owner'S Manual Download Page 195

The tethered fuel cap is located behind a hinged door
on the passenger’s side of your vehicle.

To remove the fuel cap, turn it slowly to the left
(counterclockwise). The fuel cap has a spring in it.
If you let go of it too soon, it will spring back to the right.

{

CAUTION:

If you spill fuel and then something ignites it,
you could be badly burned. Fuel can spray out
on you if you open the fuel cap too quickly.
This spray can happen if your tank is nearly full,
and is more likely in hot weather. Open the fuel
cap slowly and wait for any “hiss” noise to stop.
Then unscrew the cap all the way.

Be careful not to spill fuel. Do not top off or overfill your
tank, and wait a few seconds after you have finished
pumping before you remove the nozzle. Clean fuel from
painted surfaces as soon as possible. See Cleaning
the Outside of Your Vehicle on page 5-79.

5-9

«
...
193
194
195
196
197
...
»

Summary of Contents for 2004 Aveo















































































































































































































































































































































Reviews:

No comments