Chevrolet 2004 Aveo Owner'S Manual Download Page 11 | Manualshive

Page: 11 / 334

Chevrolet 2004 Aveo Owner'S Manual Download Page 11

Head Restraints

Adjust your head restraint so that the top of the restraint
is closest to the top of your head. This position reduces
the chances of a neck injury in a crash.

Pull up the head restraint in order to adjust the position
upward.

Push in the release button and press down on the head
restraint in order to adjust the position downward.

To remove the head restraint, pull the head restraint all
the way up. Then push in the release button and lift
the head restraint from the guide sleeve.

Replace the head restraint and reset it in the original
position before driving.

Your vehicle may have adjustable rear seat head
restraints. Push in the release button and move the
head restraint to the desired position.

1-5

«
...
9
10
11
12
13
...
»

Summary of Contents for 2004 Aveo















































































































































































































































































































































Reviews:

No comments