manualshive.com logo in svg

Chevrolet 2002 Corvette, Owner'S Manual, Page: 298 / 384

Share
Download
Chevrolet 2002 Corvette Owner'S Manual Download Page 298

6-26

Adding Coolant

If you need more coolant, add the proper DEX

-

COOL

R

coolant mixture at the surge tank, but only when the
engine is cool.

CAUTION:

You can be burned if you spill coolant on hot
engine parts. Coolant contains ethylene glycol,
and it will burn if the engine parts are hot
enough. Don’t spill coolant on a hot engine.

When replacing the pressure cap, make sure it is hand

-

tight.

Surge Tank Pressure Cap

NOTICE:

The surge tank pressure cap is a 15 psi (105 kPa)
pressure

-

type cap and must be tightly installed to

prevent coolant loss and possible engine damage
from overheating.

See “Engine Compartment Overview” in the Index for
information on location.

Summary of Contents for 2002 Corvette

































































































































































































































































































































































































Reviews:

No comments