manualshive.com logo in svg

Chevrolet 2002 Corvette, Owner'S Manual, Page: 162 / 384

Share
Download
Chevrolet 2002 Corvette Owner'S Manual Download Page 162

2-104

DIC Warnings and Messages

The following messages and warnings may appear in 
the DIC display. The DIC display area is located in the
instrument panel cluster below the speedometer and
tachometer, directly above the steering column. You may
receive more than one message at a time. Messages will
appear one behind the other. To acknowledge a message
and remove it from the display, press RESET. You may
scroll through the messages that may have been sent at
the same time. The message center is continuously
updated with the vehicle performance status.

ABS ACTIVE (Anti

-

Lock Brake System Active):

When your anti

-

lock system is adjusting brake pressure

to help avoid a braking skid, the ABS ACTIVE message
will be displayed.

Slippery road conditions may exist if this message
 is displayed, so adjust your driving accordingly. 
The message will stay on for a few seconds after the
system stops adjusting brake pressure.

ACT HNDLG 

-

 WARMING UP: When you first 

start your vehicle (especially during cold winter weather),
and begin to drive away (up to 6 mph (10 km/h)), the
message ACT HNDLG 

-

 WARMING UP may be

displayed in the DIC, the instrument panel cluster light
will be on, and a chime will sound. This is normal. 
You can acknowledge this message by pressing the
RESET button. The Active Handling System
performance is affected until the next message 
WARM UP COMPLETE is displayed in the DIC.

During hot or cold temperature conditions, this message
may be displayed in the DIC after exceeding 12 mph 
(20 kph) for 30 seconds. The Active Handling System 
is off until the WARM UP COMPLETE message 
is displayed.

WARM UP COMPLETE: If you receive this message
and hear a chime, the system has completed the
functional check of the Active Handling System.

Summary of Contents for 2002 Corvette

































































































































































































































































































































































































Reviews:

No comments