manualshive.com logo in svg

Chevrolet 2002 Corvette, Owner'S Manual, Page: 168 / 384

Share
Download
Chevrolet 2002 Corvette Owner'S Manual Download Page 168

2-110

HIGH TRANS TEMP (Automatic Transmission
Only): You will hear four chimes when this message 
is displayed. To acknowledge this warning, press the
RESET button. After you press the RESET button, 
the message will be displayed every 10 minutes until 
the condition changes. If you do not press RESET, 
the message remains on the display until the 
condition changes.

If the transmission fluid temperature rises above 270

_F

(132

_C) or rises rapidly, this message is displayed. 

The transmission may shift gears or apply the torque
converter clutch to reduce the fluid temperature. 
Driving aggressively or driving on long hills can cause
the transmission fluid temperature to be higher than
normal. If this message appears, you may continue to
drive at a slower speed. You should also monitor the
transmission fluid temperature and allow it to cool to at
least 230

_F (110_C). The transmission fluid temperature

can be monitored with the GAGES button on the DIC.
See “Automatic Transmission Fluid” in the Index. 
You should also check the engine coolant temperature. 
If it is also hot, see “Engine Overheating” in the Index.

If the HIGH TRANS TEMP message is displayed during
normal vehicle operation on flat roads, your vehicle may
need service. See your dealer for an inspection.

SERVICE ACTIVE HANDLING: If the SERVICE
ACTIVE HNDLG message is displayed, there is a
problem with your Active Handling System and your
vehicle needs service. The instrument cluster light will
also be on and a chime will sound. When this message 
is displayed, the system is not working. Adjust your
driving accordingly.

ACTIVE HANDLING: Your vehicle is equipped with
a computer controlled system to assist the driver in
controlling the vehicle in difficult driving conditions.
You may feel or hear the system working and see the
ACTIVE HANDLING message displayed in the DIC.
This is normal when the system is operating. Also see
“Anti

-

Lock Brakes” in the Index.

Summary of Contents for 2002 Corvette

































































































































































































































































































































































































Reviews:

No comments