Chetco Digital Instruments SeaGauge Remote G2, User Manual

Page: 53 / 61

SeaGauge-Remote G2 User’s Manual
support@seasmart.net version 031119 www.seagauge.com
Brookings, OR 97415
53
www.chetcodigital.com
•
READY->
At this point the unit will wait to receive the starting and ending pages to erase. Page
numbers are 512 bytes and can be calculated by dividing the starting page memory location
by 512. The following table will help you determine the table page numbers.
Table Bytes
/line
Address Start
Page
End Page Erase Command
Sensor Labels 8 6800 34 37 *3438
Groups 1 7000 38 3B *383C
Label Positions 1 7000 38 3B *383C
Alarms 1 7800 3C 3F *3C40
Channels 1 7800 3C 3F *3C40
Options 1 7800 3C 3F *3C40
Lookup Table 0 8 0800 04 07 *0408
Lookup Table 1 8 1000 08 07 *080C
Lookup Table 2 8 1800 0C 0B *0C10
Lookup Table 3 8 2000 10 13 *1014
Lookup Table 4 8 2800 14 17 *1418
Lookup Table 5 8 3000 18 1B *181C
Lookup Table 6 8 3800 1C 1F *1C20
Lookup Table 7 8 4000 20 23 *2024
Lookup Table 8 8 4800 24 27 *2428
Lookup Table 9 8 5000 28 2B *282C
Lookup Table 10 8 5800 2C 2F *2C30
Lookup Table 11 8 6000 30 33 *3034
To erase the memory you must enter a “*” symbol followed by the start and end page values
with no spaces. For example to erase the Alarms table enter:
•
*3C40
To erase Lookup Table 3 enter:
•
*1014
Once you have entered the 5 characters the unit will erase the memory and respond with
•
ERASED->
At this point the unit will wait to receive the data to reprogram the unit. Use the
HyperTerminal Send Text File function to transfer the appropriate file to reprogram the
memory. As the file is transferring data the unit will display the memory address for each