CHESTER Conquest Super Mill, Instruction Manual

Page: 19 / 23

14. Do not overreach.
-Try to keep a proper footing and balance at all times.
15. Maintain the tools with care.
- Keep the cutting tool sharp and clean for a better / safer performance. Follow the instructions
for lubricating and changing accessories. Inspect the tool cord periodically and replace if
damaged. Try to keep the handle dry & clean, free from oil & grease.
16. Disconnect the tools.
- When not in use, before servicing and when changing accessories, such as the blade, bits &
cutters etc.
17. Remove the adjusting keys and wrenches.
- Form the habit of periodically checking to see that the keys and adjusting wrenches are
removed from the machine before turning it on.
18. Avoid unintentionally starting machine.
-
Don’t carry a plugged in tool, whilst your finger is placed on the switch. Check to see if the
machine is switched off, before you plug it in.
19. Using outdoor extension leads.
- When you use your machine outdoors, ensure to check that that the cables are intended for
outdoor use.
20. Check for damaged parts.
- Before any further use of the tool, guard or part of the machine, should be firstly checked to
see if it has sustained any damage. Check the alignment of the moving parts, free running
moving parts, breakage of parts, mounting and any other conditions that may affect its
operation. A guard or other part that has been damaged, should be repaired or replaced
accordingly. Defective switches should only be replaced by Chester UK or a qualified engineer /
electrician. Do not use the machine on/off switch does not function.
21. Stay alert.
- Wat
ch what you are doing. Use common sense. Don’t try to operate the machine when tired.
22. Warning.
- The use of any accessory or attachment, other than those recommended in this instruction
manual, may present a risk to health.
23. Have your tool repaired by a qualified person.
- This electric tool is in accordance with the relevant safety requirements. Repairs should only
be carried out by Chester UK or a qualified engineer / electrician, using original spare parts.
19