CHESTER Conquest Super Mill, Instruction Manual

Page: 15 / 23

5.2 Travel Adjustment
Using the limit block can control the travelling of the spindle box.
1. Loosen the handle (a) at the side of the limit block.
2. Adjust the limit block (b) in position.
3. Tighten the handle.
4. Travel position can refer to the ruler on the fuselage rotary.
5.3 Adjust Tip Angle of Head
1. Disconnect the machine from the main power source before you make any adjusts to the
machine.
2. Secure the machine.
3. Loosen the locked nut (a) with a wrench (b).
4.
Adjust the fuselage dip angle to your required angle (Max is 45˚, in either direction).
5. Tighten the nut after adjustments have been made.
15