Configuration
Use the iPad Mymesh commission app for configuration of the Remote switch. First enable
commission mode by operating both the left and right switch until 3 beeps are given. After
pushing of one of the buttons or 30 sec the Remote switch will go to normal mode again.
Usage
For operational use in the Mymesh network the Remote switch must be in normal mode.
Compliance
This product complies with the European directives and relevant standards for low voltage,
EMC, RED, REACH and RoHS. The Remote switch three button contains a radio. The applied
radio frequency is within the ISM band 2400 – 2483.5 MHz (default 2403 MHz) and the
maximum transmit power is +4 dBm. Hereby, Chess Wise declares that the radio equipment
type Remote switch three button is in compliance with Directive 2014/53/EU. The full text of
the EU declaration of conformity is available at chess-wise.eu/downloads.
Repair
Do not open this product. In case of failure the Remote Switch must be replaced.
Recycling
Do not dispose this product as household waste, but bring it to an appropriate collection point
for recycling.