Training Center of After-Sales Department Chery International
3. Cruise control system
58
To lessen driver’s burden to depress accelerator pedal, for CVT vehicle, the cruise control
system can make the vehicle driving at a constant speed between 40km/h and 130km/h where
the engine power permits so.
1. With IGN SW ON, press cruise switch ON, and the cruise indicator lamp on instrument
cluster will be lit and flash (pre-cruise, that’s normal). During driving, if the vehicle speed is
between 40km/h and 130km/h, press the cruise switch SET/-, the vehicle will perform the fixed-
speed cruise driving at the speed set by pressing SET/- (in this case, do not depress the
accelerator pedal. The cruise system will automatically control the openness of throttle pedal
depending on road conditions). Cruise indicator lamp on shows that the cruise mode is
activated. If the cruise indicator lamp continues flashing, the cruise mode is not activated.
Please try again(if it fails again, please contact Chery service station for troubleshooting).
2. In the cruise mode, depress the accelerator pedal (during this process, the cruise indicator
lamp will remain lit), and the vehicle speed will increase. Release accelerator pedal, the vehicle
will restore the cruise speed before accelerator pedal is depressed.
3. In the cruise mode, depress the accelerator pedal (during this process, the cruise indicator
lamp will remain lit), and the vehicle speed will increase. Release accelerator pedal, press the
cruise switch SET/- and the vehicle will cruise at a new speed.
Function description of cruise control system
2. Working principle
MASHINESOFT.COM
09120146259
