Training Center of After-Sales Department Chery International
16. Safety airbag system
248
3. Notices of repair and maintenance
(6) Do not remove or repair the steering wheel liner, front passenger safety airbag assembly,
safety airbag sensor assembly and front safety airbag sensor to permit further use.
(7) Avoid vibration of steering wheel liner or approach the magnet to the liner. Avoid direct
exposure of steering wheel liner, front passenger safety airbag assembly, safety airbag sensor
assembly or front safety airbag sensor to hot air or flame.
(8) If steering wheel liner, front passenger safety airbag assembly, safety airbag sensor assembly
or front safety airbag sensor has been once fallen, or the casing, bracket or connector is cracked,
pitted or otherwise damaged, new ones shall be used. If the steering wheel liner is contaminated
with grease, cleaner, engine oil or water, such liquid shall be immediately removed.
(9) After the steering wheel liner is removed, store it steadily with the top face up. Never put any
load on its top face.
(10) When rejecting the car or steering wheel liner, do firstly have the airbag exploded by the
professional organization.
(11) After the airbag is exploded, the air charger in the steering wheel liner will become very hot,
and it shall be cooled down before any operation. Never cool it using water.
(12)The high-impedance (at least 10kΩ/V) Volt-Ohm meter shall be used for diagnosis of the
circuit.
MASHINESOFT.COM
09120146259
