Chery QQ3, User Manual

Page: 67 / 184

Instruments and control devices
58
Manual mode:
In the manual gear shift mode, the
gearshift selected by the driver will be
displayed on the display in the
column-shaped form.
Automatic mode:
Press the “AUTO” button to enter the
automatic gear shift mode. In this case,
the “AUTO” indicator in the instrument
panel will light, and the current gearshift
will be displayed on the display in the
column-shaped form.
Turn signal indicator lamp/hazard
alarm flash indicator lamp
When turn on the turn lamp switch or
hazard alarm lamp switch, their indicator
lamp flash, which ind icates that the
external turn signal lamp or hazard alarm
lamp is working. The high flash
frequency shows that the turn signal lamp
bulb has trouble.
！
CAUTION
If the bulb is burnt out, immediately
replace it to avoid the occurrence of
accident. If the green arrow doesn’t light
when the turn signal is sent out, please
check whether the fuse and bulb are burnt
out.
High beam indicator lamp
Turn on the high beam, this indicator
lamp will light.
Front/Rear fog lamp switch
The 1
st
The 2
gear is used to turn on the front fog
lamp.
nd
When the switch is placed to the 2
gear is used to turn on the front and
rear fog lamps, or turn on the rear fog lamp
only.
nd
After the ignition switch is turned on, the front
fog lamp will work only after the position
lamp is turned on, and can work together with
the high beam or low beam. The rear fog lamp
can work only with the front fog lamp at the
same time.
gear
position, the indicator lamp on the switch will
light.
Since the glare of the rear fog lamp is
strong, the rear fog lamp is allowed to be
used only in the case of low visibility
Gearshi ft display